MCB & Distribution Boards

"Capital" MCB provides protection against thermal overload and magnetic short circuit. Housed in hi-tech glass fibre filled polyester and ensures high electrical-mechanical properties.

An over-current protection device should be capable of making & breaking any over-current upto & including the prospective short circuit current at the point where the device is installed. When this is greater than 6 KA, the MCB should be provided with suitable back-up protection in the form of HRC fuse. MCB is normally not effected by surge current caused by switching on of filament or fluorescent lights & derating is not necessary when used in lighting circuits. MCB should not be used for complete protection of a motor, yet it can provide adequate protection for cables leading upto the motor, Correct selection of MCB will depend on the starting characteristics of the motor.

Products Detail

	MCB Single Pole Switch Panel Mounting 6 A to 32 A (Type-CP MCB)

	ISOLATOR Double Pole 40 A to 100 A (Type-CISO)

	MCB Single Pole (Type-C MCB) 0.5 A to 63 A

	ISOLATOR Triple Pole 40 A to 100 A (Type-CISO)

	MCB Single Pole With Neutral 6A to 63 A (Type-C MCB)

	ISOLATOR Four Pole 40 A to 100 A (Type-CISO)

	MCB Double Pole 6 A to 63 A (Type-C MCB)

	ELCB 25 A / 32 A 100 ma 40 A to 63 A 100 ma 25 A / 32 A 100 ma 40 A to 63 A 100 ma (Type-CELCB)

	MCB Triple Pole 6 A to 63 A (Type-C MCB)

	CHANGEOVER SWITCH Centre Off 25 A to 40 A (Type-CCOM)

	MCB Triple Pole With Neutral 6 A to 63 A (Type-C MCB)

	PLUG Metal Clad 20 A (Type-CP20) 20 A (Type-CPT20) 30 A (type-CPT30)

	MCB Four Pole 6 A to 63 A (Type-C MCB)

	SOCKET Metal Clad 20 A (Type-CS20) 20 A (Type-CST20) 30 A (Type-CST30)

Next >>